Equipment Maintenance Policy

Official Preventive Maintenance Recommendations

Regular maintenance is essential to ensure the longevity, safety, and smooth operation of your equipment. It is the owner’s responsibility to perform—or have performed at their own expense—this preventive maintenance in accordance with recognized standards within the commercial fitness industry. The integrity and safety of each machine fall entirely under the owner’s responsibility, who must ensure that all equipment remains in proper working condition.

Weekly and monthly maintenance tasks are designed to be easily carried out by the owner or their staff, although we strongly recommend that they be performed by a certified technician to ensure optimal performance and prevent premature wear.

Quarterly maintenance, however, must absolutely be performed by a certified technician or by an employee who has received factory training provided by our team, due to the more technical and critical nature of the inspections required.

Please note that failure to follow the maintenance program may result in:

  • Refusal of warranty service if the equipment has not been maintained according to the required standards;

  • Accelerated wear or mechanical failure;

  • Direct owner liability in the event of an accident, injury, or damage caused by an unsecured or improperly maintained machine.

These maintenance actions must be rigorously followed to maintain proper equipment operation and ensure optimal durability and safety.

Important Notes

  • Lack of maintenance may cause premature wear, reduced performance, or major failures not covered under warranty.

  • We strongly recommend the use of a preventive maintenance schedule.

  • Revenge Fitness can assist you in implementing a personalized maintenance program as well as preventive maintenance visits.

Approved Lubricants

For guide rods, seat and backrest posts:

  • TFL 50 Wet Lube (aerosol)

For chains, bearing plates, bearings, bushings, and Smith machine guide rods:

  • Superlube Multi-Purpose Synthetic Grease with Syncolon PTFE

For elevation motor lubrication:

  • 3-in-1 Oil

LOCTITE Products

If bolts or nuts frequently come loose, use the appropriate product:

LOCTITE 243 (Blue)

  • Anti-vibration, medium strength, removable.

  • Suitable for parts that may need to be removed for replacement.

LOCTITE 263 (Red)

  • High strength, permanent fastening.

  • Use only on components that will not require future disassembly.

– Strength Equipment

Weekly Maintenance

  • Clean and lubricate guide rods using an approved lubricant.

  • Visually inspect cables and pulleys for:

    • Fraying or premature wear

    • Cracks or flat spots

    • Misalignment

  • Check tightness of bolts and nuts at pivot points.

Monthly Maintenance

  • Full inspection of all bolt and nut tightness.

  • Verify cable tension and adjust as needed.

  • Clean the frame and upholstery with an approved cleaner.

  • Perform several repetitions to confirm:

    • Smoothness of movement

    • Absence of abnormal noises

    • Proper biomechanical function

  • Test adjustment handles (range selector, arms, starting positions) for:

    • Smooth operation

    • Proper locking

  • Test seat and backrest adjustments.

  • Inspect the selector pin and its lanyard:

    • Proper insertion

    • Lanyard integrity

    • Replace if bent or damaged.

Quarterly Maintenance

  • Clean the weight stack compartment:

    • Vacuum dust and debris

    • Wipe the top of the first plate

  • Mechanical inspection of pivot points:

    • Tightness

    • Condition of shafts, bushings, or bearings

  • Mechanically verify all bolt tightness.

  • Perform repetitions under load to detect abnormal noises.

  • Test all adjustment handles.

  • Deep inspection of the selector pin and lanyard.

– Treadmill

Weekly Maintenance

  • Check running belt alignment.

  • Check condition and proper function of the emergency stop clip.

Monthly Maintenance

  • Check belt tension and alignment.

  • Test emergency stop and clip integrity.

  • Inspect power cord.

  • Test console buttons and modes.

  • Check heart rate sensors.

  • Perform a short workout to verify smoothness and absence of noise.

  • Clean deck edges and foot rails.

Quarterly Maintenance

  • Clean inside the motor compartment.

  • Clean and lubricate the elevation motor.

  • Test speed and incline.

  • Clean under the running belt.

  • Inspect wear of the drive belt, running belt, and deck.

– Elliptical

Monthly Maintenance

  • Inspect pedals, moving arms, and joints (mechanical play).

  • Test all console buttons and modes.

  • Inspect power cord.

  • Use the machine to check for smoothness and absence of rubbing.

  • Check heart rate sensors.

  • Clean inside the pedals.

Quarterly Maintenance

  • Check pivot tightness.

  • Lubricate rails (if applicable).

  • Dust inside under the covers.

  • Check alignment of internal belts and wear components.

– Upright Bike

Monthly Maintenance

  • Check pedal and crank tightness.

  • Test console buttons and modes.

  • Clean surfaces, pedals, and handlebars.

  • Check heart rate sensors.

  • Verify bike stability.

  • Perform a usage test to detect abnormal noises.

Quarterly Maintenance

  • Check tightness of all frame bolts.

  • Inspect internal belts.

  • Verify smooth rotation of the crank system.

  • Clean inside the shroud.

– Recumbent Bike

Monthly Maintenance

  • Inspect pedals and cranks.

  • Test console buttons and modes.

  • Clean surfaces, seat, handles, and handlebars.

  • Check heart rate sensors.

  • Verify bike stability.

  • Perform a usage test.

Quarterly Maintenance

  • Check all frame and seat bolts.

  • Inspect internal belt.

  • Verify crank smoothness.

  • Clean inside the shroud.

– Indoor Cycle (Spin Bike)

Weekly Maintenance

  • Clean the bike (sweat, corrosion).

  • Check tightness of handlebars, seat, and pedals.

  • Lubricate height and fore/aft adjustment points.

Monthly Maintenance

  • Test resistance (uniformity).

  • Test console/display (if equipped).

  • Verify bike stability.

  • Perform a usage test.

Quarterly Maintenance

  • Check all frame bolts.

  • Clean under the covers.

  • Inspect internal belt.

– Stair Climber

Monthly Maintenance

  • Test console buttons and programs.

  • Check power cord.

  • Test several resistance/elevation levels.

  • Listen for abnormal noises.

  • Clean steps/pedals and exposed surfaces.

  • Check movement smoothness.

Quarterly Maintenance

  • Clean inside the motor compartment.

  • Check alignment and condition of internal chains/belts.

  • Check tightness of frame and step bolts.

  • Test under full load.

  • Clean and grease internal chains and bearing plate.

– Rower

Monthly Maintenance

  • Inspect handle and cord/chain.

  • Check monitor operation.

  • Clean rails and seat.

  • Test resistance.

Quarterly Maintenance

  • Lubricate chain (chain-based models).

  • Check seat rollers/bearings.

  • Check frame and support tightness.

  • Clean inside the fan housing.

Legal Clause and Reservation of Rights

REVENGE Fitness reserves the right to modify, update, or adjust at any time and without prior notice the recommendations, maintenance procedures, maintenance intervals, suggested products, technical requirements, and instructions contained in this document.

Such modifications may be made without possible recourse by the user, without any obligation of notification, and without creating any liability whatsoever for REVENGE Fitness.

The user and/or owner remains fully responsible for:

  • Staying informed of updates published by REVENGE Fitness;

  • Following the most recent maintenance procedures;

  • The integrity, safety, and ongoing maintenance of the equipment;

  • Any consequences resulting from inadequate, incomplete, or non-compliant maintenance.

REVENGE Fitness shall not be held responsible for damages, injuries, losses, failures, service interruptions, or claims arising from:

  • Poor maintenance;

  • Lack of maintenance;

  • Maintenance not performed according to required standards;

  • Use of unapproved lubricants, products, or parts.

By using REVENGE Fitness equipment, the user acknowledges their responsibility to ensure proper maintenance and accepts all conditions stated in this section.